Tools (9 adverts)

``` Угловая шлифовальная машина CHUANG оснащена мощным бесщеточным двигателем, который продлевает ресурс УШМ вдвое, обеспечивает низкий уровень шума и делает данную модель одной из самых компактных и эргономичных в своем классе. Плавный пуск, регулировка оборотов. ```

KEN 4510B electric parquet is a compact circular saw designed for cutting water-cooled material at an angle of 45 to 90 ̊. Allows to provide high-quality cutting material up to 30 mm thick, thanks to the use of cutting discs with a solid cutting edge with a diameter of up to 125 mm. Disk landing on the shaft of the car - 20 mm. The machine is indispensable for cutting long plates, when there is no possibility to use stationary equipment, for cutting niches, as well as removing chamfers. Power - 1300 watts Maximum disk size - 125 mm Rotation speed - 13,000 rpm Planting place - 20 mm

The Bulgarian C125-2T is equipped with a powerful engine, with speed adjustment.

The Ela-1403S is a lightweight and affordable pneumatic grinder, weighing just over a kilogram (1.04 kg), so its use is tireless even for a long time. Ease of operation contributes to the ergonomic body and the presence of a side handle holder in the configuration. The model operates with a water supply. To perform the work, taking into account the individual characteristics of the material, water supply adjustment is provided. The air supply, which is the energy for the Ela-1403S, is also regulated. The machine runs on compressed air, which makes it safer for use in wet rooms than electric models, and the only possible in the absence of electricity. Features: Air consumption: 0.45 m3/min. Pressure: 621 kPa. Rotation speed: 0-4500 rpm. Landing diameter under the plate: M14 Maximum diameter of flexible grinding wheels: 115 mm Machine weight: 1.04 kg Turnover adjustment: available

The Ela-1401 S is a lightweight and affordable pneumatic grinder, weighing just over a kilogram (1.04 kg), so its use is tireless even for a long time. Ease of operation contributes to the ergonomic body and the presence of a side handle holder in the configuration. The model operates with a water supply. To perform the work, taking into account the individual characteristics of the material, water supply adjustment is provided. Also regulated is the supply of air, which is the energy for the model Ela-1401 S. The machine runs on compressed air, which makes it safer for use in wet rooms than electric models, and the only possible in the absence of electricity. Features: Air consumption: 0.45 m3/min. Pressure: 621 kPa. Rotation speed: 0-4500 rpm. Landing diameter under the plate: M14 Maximum diameter of flexible grinding wheels: 115 mm Machine weight: 1.04 kg Turnover adjustment: available

``` Характеристики: ``` Vibration frequency: 3000-6000b/min Vibration force: adjustable and has 6 modes Power: Lithium-ion battery 21V, 4 ah (complete 2) Continuous operation time: about 1.5 hours Charging time: 2h Scope of application: tile more than 160 cm Vacuum bowl size: 166mm Net weight: 4.43kg The vibration sucker is the most powerful and can be used when working with tile size lj 160 cm, alignment with vibration and carrying tiles, well suited when working with a large format. It is used for carrying and installing floor and wall tiles, which significantly increases the efficiency of work. Designed to seal the base and remove air from under the tiles during laying. This ensures perfect tile adhesion to the floor or wall. The small size and light weight make this equipment very convenient to use. The ergonomic handle is designed for greater convenience and safety. There's a charge indicator on the body. It has 2 batteries, which ensures smooth operation.

Electric machine with water GX 5966WP2 (1200-4600ob / min) 2 batteries

Available and to order grinding machines GALESKI (Germany). Power - 900/1400/1700 W, with and without water supply. Warranty and post-warranty service. Sending to TC regions,