Five-axis bridge automatic stone machine SAWJET ORBIT A5, AITALMAC (Aitalmak, Italy-China)

Puerto Why is the WaterJet module installed on a 5-axis machine? - Of course, in terms of operating the machine as a typical “five-sevic” or a full-fledged WaterJet, this does not make much sense. Why? A lot of "buts", and the whole thing is in the use of the old type of water pump - injection - no efficiency or constant operation of engines, wear and tear, electricity consumption. - But the task for this was still – in some types of products you need a quick trimming of sharp corners and other subtle moments as part of the overall work. For this purpose, a cutter or an additional spindle is often used now. Of course, it is relatively cheap, but it is done slowly and there are serious limitations. As a result, as soon as it became possible to create a clear and effective SERVO pump for the rapid full inclusion of WaterJet, then it made sense to install this module on a 5-axis machine. Now hydraulic cutter has become a full-fledged, operational and understandable assistant in complex works with flat parts. This was done with the SawJet Orbit A5 from AitalMac. If you have additional questions about the topic of tools and equipment, feel free to contact: Write to WhatsApp (https://wa.me/+79262262638) +7 (926) 226-26-38 zakaz@almir.com